LED T8 Tube Lamp is similar to ordinary fluorescent lamp shape tube, can replace ordinary fluorescent lamp lamps. Compared with ordinary fluorescent lamps, the brightness of LED fluorescent lamps is especially softer and easier to accept. Next, let's take a look at the installation and use of LED fluorescent lamps.
1, Installation: LED with constant current driver, do not need ballast, starter. General T8 above the tube because the tube space is large enough, constant current driver can be installed in the tube. Therefore, in the installation, the rectifier and starter can be removed from the original bracket, and the lamp can be installed directly.
2, Voltage: Advance Lighting production of LED T8 tube lamp has a wide voltage adaptability, AC85-277V, the world can work normally.
3, Heat dissipation: Advance Lighting T8 tube lamp is equipped with aluminum heat dissipation shell, under normal circumstances, there is no problem in heat dissipation. However, if it is used in a heavy place, dust should be removed regularly to prevent dust from covering the radiator and affecting heat dissipation.
4, Waterproof: LED T8 tube lamp because the tube is composed of two parts: the upper part is divided into aluminum radiator, the lower part is divided into soft cover, there is a gap in the connection, so, to prevent lampblack, water vapor into. If it is used in places with heavy smoke and water vapor, it is recommended to add a protective cover. A regular shield will do.
5, Vibration: LED T8 tube lamp has a strong anti-vibration ability. As long as it is not a violent impact, it usually does no damage. But it may have some impact on the flexure board. And the traditional fluorescent lamp, is glass, close to the vacuum inside, vibration may cause an explosion, pay special attention to vibration.
Contact Person: Miss. Eva Chen
